But, then I had an idea in my head that I couldn't kick. I had to try and see if I liked it. And guess, what? I love it! Now I just wish I had two dining rooms that look exactly the same so I can have my framed lavender in one and the sunburst in the other ;)
This framed lavender project was one of those projects that I envisioned, looked good in my mind, but then had no clue if it was going to look as good once executed. I'm so glad it turned out half decent lol.
Here's how I made the frames and dried the lavender for them:
Supplies:
1/4" plywood (I used a starting 2'x4' piece.)
4 -1x2s
Stain
Paint
Nail gun/nails or screws
Picture hanger (the claw type)
Lavendar
Small nails (to hang lavender)
First, I measured out my plywood, and divided it up into 6 pieces.
I cut six of them at 12"x15". If you don't have something to cut it, ask your local lumber store to do you a favor. I used my Dremel Ultra-Saw, ...the none scariest cutter in my opinion :)
I decided it would be easiest to paint and stain all the pieces before assembly. I stained my 1x2s dark walnut and painted the plywood white.
I then cut the wood pieces (not shown). For each frame, I had two 14" pieces and two 13" pieces.
I placed the longer pieces on the top and bottom and smaller 13" pieces on the sides. So, this made the entire frame measure 14" wide and 16" high. I placed the wood stain side down on a flat surface. I then placed the plywood paint side down onto the wood letting it overlap onto each piece of wood. I secured each side with my nail gun using 1/2" nails.
I did this with all six of them. Next was to touch up the stain on the cut edges.
I then added the claws onto the back. I made sure that each one was in the same location as the others. About 1" down and 7" in the middle.
I then cut some fresh lavender from my garden. I separated them into 6 handfuls, tied the ends with some jute and then hung them all to dry for a couple of days.
Once they were dried and the frames were made, I tied another cute jute bow onto the ends. Nailed a small nail into the center of the white, and hung the jute from it. I made sure not to hit the nail into the plywood so hard that it went through the back. Just enough that it stayed put though.
I just love the new look these gave my dining room. It was so weird getting used to it. A little busy at first, truthfully, but once I got used to it, I had no problem with them.
Here's a quick look at how my sunburst mirror looked in here. See? Totally a hard decision to get rid of it, huh?!
Don't worry about the sunburst mirror. It found a new home in my front room. This is actually where it's first home was years ago.
I am now going on a complete tangent, but check out this before picture when I first posted about the mirror :)
Whaaaat? Same room. Yep. Crazy!! That's when my couch actually stayed clean and stain free. Now it's just a constant mess lol :) Here's the link to make the mirror if you are so inclined to want to make one for yourself :) (click HERE)
Pin for later :)
Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”
0 comments